Meet at 1:45 before the guest speaker!
Note that all function definitions, inputs, and outputs are written at the top of the checker file for each problem. SO READ CAREFULLY BEFORE YOU START RUNNING THE SCRIPT.
Test script by Jon - only HW2-7 & HW2-8 so far
Right-click the MaxIm DL Pro 6 icon and click Execute. First we’ll combine all images. Essentially, you should combine every series of images you take (Lights, Darks and Flats!) Go to Process>Stack Click “Add Files…” Highlight your group of images. If you took 5 images in your series, you should be selecting those 5 images.... Continue Reading →
Launch DS9 Go to Analysis>Image Servers>SAO-DSS Next to ‘α’ type in your object’s right ascension and next to ‘𝛿’ type in your object’s declination. Make sure you are using sexagesimal units. Set both width and height to 15 arcminutes. Make sure you indicate the sign (+ or -) for declination Keep the coordinates in the... Continue Reading →
When conducting any type of research, it is essential that all steps be documented. An observing notebook is used in this program and should document all of your work on the orbit determination problem. Class notes and other information should not be kept in this book. Here are some general guidelines: All work in the... Continue Reading →
Opening Procedure Make sure everything on the deck is clear of the roof (i.e. binoculars, small telescopes, etc.) Open the roof using the green open button on the north wall. Flip the master power switch on the right side of the desk. You should hear the fans on the telescope turn on and the mount... Continue Reading →
You do NOT need to buy a Buff card to load money for laundry. You can load money onto your room key online with a credit card.
Packages or mail being delivered to SSP participants should be sent to the following: CU Conference Services Attn: SSP/Name 2480 Kittredge Loop Dr #1953 Boulder, CO 80310
Cyndia - Read this to understand how to format a blog post. A quick summary goes here.